Page 2 of 4

Sliding Key Holder

This Sliding Key Holder is one of our curated designs. It was produced by Luca Parmegiani and is featured on MyMiniFactory. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

This device aids in increasing grip and helps to turn the key more easily. It is a composed of three pieces. There is a track between the two pieces which allows the sliding of the key. The pieces fit together to keep the key and there are two holes where to put your fingers to get a better grip when using the key.

You may also wish to view more key holder designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Ring Pull Can Opener

This Ring Pull Can Opener is one of our curated designs. It was produced by Luca Parmegiani and is featured on MyMiniFactory. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

This is to help people with either arthritis or weak hand grip to open ring pull cans. Extremely easy to use, just hook the end under the ring, fold forward and then roll back.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Door Knob Lever Adapter

This Door Knob Lever Adapter is one of our curated designs. It was produced by Michael Gulak and is featured on Thingiverse. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

This device is to help people with arthritis or anyone having difficulty in twisting their wrists. To open door simply apply a downward force with one or two fingers and pull door forward. A knurled area provides a non slip grip.

It installs in minutes and is designed to work with a common Qwikset 1.875″ (47.6mm) diameter round door knob. A single #6 x 1/2 inch long sheet metal screw clamps the adaptor tightly to the door knob, it can be mounted for left or right hand operation.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Plug Pull

This Plug Pull is one of our curated designs. It was produced by Luca Parmegiani and is featured on MyMiniFactory. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

This is a plug handle that helps minimise hand strain and also help people with weak hand grip. It can be used with British plugs with different forms and dimensions.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Scissors Support

This Scissors Support is one of our curated designs. It was produced by Makers Help Care and is featured on Thingiverse. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

This support holds your scissors upright, so you can use it with only one hand. It consists of three parts: the platform, a clamp, and a screw. It is ideal for people with poor dexterity, weak fingers or someone who can only use one hand.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Dyslexia Reading Bar (Curved)

This Dyslexia Reading Bar (Curved) is one of our curated designs. It was produced by Makers Making Change and is featured on Thingiverse. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

3d print Dyslexia Reading Bar (Curved)

The dyslexia bar isolates text on a page so readers can focus on reading one or two lines at a time. This reading bar is curved to contour an opened book.

You can also check out its flat version here.

You may also wish to view more general assistive tool designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Zip Grip Zipper Pull

This Zip Grip Zipper Pull is one of our curated designs. It was produced by Ion Gurguta and is featured on Cracked It. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

3D Printed Zip-Grip Zipper Pull 1

The Zip Grip Zipper Pull snaps onto a zipper to extend the pull tab. Ideal for persons who have difficulty grasping and pulling small zipper tabs.

Just insert the peg of the Zip Grip Zipper Pull through the hole on a standard zipper, fold in half and press to snap shut. Ring diameter measures 2.9cm.

Must be printed using flexible filament only, with 100% Infill. Printing time is 30min +/-

You may also wish to view more general assistive tool designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Large Pickle Jar Holder

This Large Pickle Jar Holder is one of our curated designs. It was produced by DEMAND Design and Manufacture and is featured on Crack It. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

Get a grip on big jars! Stand your pickle jar in this special base to hold it steady while using a cap opener to twist off the lid. The foam on the inside of the base grips the jar while the foam on the outside stops the base from turning on the work surface or tabletop.

You may also wish to view more general assistive tool designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Microwave Door Opener

This Microwave Door Opener is one of our curated designs. It was produced by Ezra Reynolds and is featured on Thingiverse. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

This tool allows people with disability to easily open a microwave and heat up their food by themselves.

This device consists of a slider and a track (two tracks in the file – one screw into the countertop, one can be glued or secured with double-sided tape). The slider can be pushed with a forearm or a clubbed hand, and the slider pushes the microwave door button.

The slider and track should be aligned with the microwave button so that the pusher makes full contact with the button. When the door is shut, the button pops back into place, pushing the slider back to the front of the track.

You may also wish to view more kitchen aid designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

The Next Beverage Holder

This Next Beverage Holder is one of our curated designs. It was produced by Nils Beinke and is featured on Thingiverse. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

3d print the next beverage holder 13d print the next beverage holder 2

The Next Beverage Holder, whose height and angle are adjustable, is big enough to hold a glass, a cup or a can. Perfect for people who have difficulty holding a beverage such as those with arthritis or weak hand grip.

You may also wish to view more eating aid designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Beverage Holder for Crutches

This Beverage Holder for Crutches is one of our curated designs. It was produced by Hobb3s and is featured on Thingiverse. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

The Beverage Holder for Crutches is a handy drink holder for cups, cans, and bottles. It can also hold small food (such as a banana or protein bar) and cellphone. This device provides a helpful solution for crutches, cane, walker and wheelchair users to easily carry beverages while using a mobility aid.

You may also wish to view more crutch accessory designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Adapted Tweezers

This Adapted Tweezers is one of our curated designs. It was produced by Pole Ergo and is featured on Thingiverse. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

This tool is designed to allow users with limited pincer grasp or tremors to easily use tweezers.

You may also wish to view more general assistive tool designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Bag Holder for Crutches

This Bag Holder for Crutches is one of our curated designs. It was produced by WoiD and is featured on Thingiverse. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

This is a very useful tool to help cane or crutch users to carry shoulder bags or even grocery bags.

You may also wish to view more crutch accessory designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Ring pull Can Opener

This Ring pull Can Opener is one of our curated designs. It was produced by Ian and is featured on Cracked It. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

An easy to grip handle for some extra leverage when opening your pop cans. Simply slip the lever into place on the tab of a pop can and pull the lever back. Voilà the pop can is open with barely any force required!

You may also wish to view more bottle opener designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Credit Card Aid

This Credit Card Aid is one of our curated designs. It was produced by by Pole_ergo and is featured on Cracked It. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

Sometimes the simplest fixes are the best! A 3D printable holder to help you get a grip when using ATM’s or chip and pin devices. Especially useful for people with hand tremors.

You may also wish to view more grip aid designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Fork and Spoon Support

This fork and spoon support is one of our curated designs. It was produced by Luca Parmegiani and is featured on MyMiniFactory. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

This fork and spoon support will help someone who has difficulty with grip to hold eating utensils. It is a single piece that fits the shape of the hand and can fit different types of forks and spoons. 

This can be used with the Pen Holder Attachment

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Drawer Opening Assistive Device

This Drawer Opening Assistive Device is one of our curated designs. It was produced by Sashmo The Muffin Man and is featured on Cracked It. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

A no-grip drawer pull for anyone that is unable to grip and pull the drawer knob. Designed to be hooked over the top of a drawer to provide a method to open the drawer with your wrist, arm, or fist.  It can also be used to hung bags or dishrags on the handle.

You may also wish to view more general assistive tools designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Cutlery Grips

This Cutlery Grip is one of our curated designs. It was produced by Pole Ergo and is featured on Thingiverse. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

The Cutlery Grips are large in size and textured to help enhance grip for people with arthritis or hand weakness. The large grip will help ease pressure on joints, allowing the user to eat without discomfort or pain.

You may also wish to view more eating aid designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Drinks Can Holder

This Drinks Can Holder is one of our curated designs. It was produced by Rony Sett and is featured on My Mini Factory. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

This Drinks Can Holder can easily snap to any 250 ml can, allowing users to easily drink from it. The large grip handle allows greater control and helps avoid spills. Very useful for people with hand tremors or limited hand grip.

You may also wish to view more eating aid designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Wheelchair Mounted Dog Treat Dispenser

This Wheelchair Mounted Dog Treat Dispenser is one of our curated designs. It was produced by Kenneth MacLean and is featured on Cracked It. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

3d print wheelchair dog treat dispenser

A dog treat dispenser that can be attached to a wheelchair, to aid training of an assistance dog.

You may also wish to view more wheelchair accessories designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Brake Handle Extender

This Brake Handle Extender is one of our curated designs. It was produced by Pole Ergo and is featured on Cracked It. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

This wheelchair brake handle extender is designed to assist users in accessing the brake lever and reduce the strength needed to use it.

You may also wish to view more wheelchair accessories designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Stabilized Cup and Plate Holder

This Stabilized Cup and Plate Holder is one of our curated designs. It was produced by Hartvik Line and is featured on My Mini Factory. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

The Stabilized Cup and Plate Holder can safely hold various cups and plates, even cups with a handle. This design won 1st place at The Crutch Accessory Challenge held by Grabcad.com.

You may also wish to view more crutch accessory designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Wheelchair Crutch Carrier

This Wheelchair Crutch Carrier is one of our curated designs. It was produced by Himagain and is featured on Thingiverse. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

A handy wheelchair accessory that holds crutches or walking sticks firmly in place. It helps keep crutches or walking sticks close for getting in and out of the wheelchair.

You may also wish to view more wheelchair accessory designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Yogurt Pot Opener

This Yogurt Pot Opener is one of our curated designs. It was produced by Tomodachi and is featured on Cracked It. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

This handle is designed to help people with limited use of their hands to open a variety of plastic containers such as yogurt, margarine, and similar containers. This provides stability and dexterity to open these types of commonly used containers. There is also a small point on the other side of the tool can cut open the plastic seal.

You may also wish to view more kitchen aids designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.

Curved Arthritis Aid Spoon

This Curved Arthritis Aid Spoon is one of our curated designs. It was produced by Jeremy Bell and is featured on My Mini Factory. Links to download this design can be found at the end of this article together with options to order a 3D print and/or design modification from us.

3d print curved arthritis aid spoon

This Curved Arthritis Aid Spoon is specially made for people who have limited wrist or arm movement. It was intentionally angled to make it easier to eat and promote independence. 

You may also wish to view more eating aid designs in our library.

To download the file(s) for this design, please click here. If you’d like to learn more about ordering a print or requesting a design modification, please see our 3D Design and 3D Printing services page.